Fancom WEBLINKBOX Installationsanleitung Seite 15

3. Choose one of the following options:
a. Click New scan for controls if you want to activate the WebLinkBox to search for
connected controllers (this may take some time).
b. Click Rescan for controls if you want to activate the WebLinkBox to search for
missing controllers.
c. Click Erase all if you want to erase all retrieved text files of the controllers.
The following window appears if you have chosen option a or b.
If several controllers are connected they will be categorized according to type
(F2000, 700, FC) and then according to the computer number as set in the
controllers.
4. Enter the controller name.
Naming a controller will make it visible on the main page. If the controller is
added without a name,
the name of the controller will be used. Only F2000 controls have a name, 700/
FC systems always have to be given a name.
5. Select the checkbox behind the controller name to add the controller to the list of
controllers on the main page.
6. Click Apply.
Only 1 controller or section can be added or removed at the same time. There
is a maximum of 50 sections/controls. Deactivated sections/controls also
count.
To remove a controller from the list of controllers on the main page deactivate
the checkbox behind the controller name and click apply.
On the main page the name of the controller will appear followed by the type of
controller and program version. Click on the name of the controller to access the
settings of the controller. concerned.
Gndf
g
12