Fancom WEBLINKBOX Installationsanleitung Seite 12

IP-Address range
192.168.xx
192.168.2.x
Changing the standard IP-address
After changing the IP-address you can check if the settings are correct. See
page 14.
Change the standard IP-address on the PC
To change the standard IP-address of the WebLinkBox you have to perform the steps
explained in paragraph "Creating connection settings to connect the WebLinkBox to
the PC" page 6.
Reserve an IP-address that is not yet in use in the current network. This
IP-address will be assigned to the WebLinkBox as described in the next
section.
Change the standard IP-address on the WebLinkBox
To change the standard IP-address on the WebLinkBox:
1. Start a web browser on the PC.
2. Enter the IP-address of the WebLinkBox in the address bar and login using the
installer's password.
3. Go to the window System configuration:
Subnet mask
255.255.0.0
255.255.255.0
Gndf
g
9