Mounting The Product; Using The Product; Cleaning And Maintenance - Dometic FP300 Montage- Und Bedienungsanleitung

Mounting the product

4 Mounting the product
I
NOTE
To mark the holes for the blind, you can use the template that is included
in the package.
➤ Mount the blind as shown in the figures: fig. 2, page 3 to fig. 0, page 7.
fig. 3, page 4: Mounting without camera sensor box
fig. 4, page 4: Mounting with rain sensor box
fig. 5, page 4: Mounting with camera sensor box 1
fig. 6, page 5: Mounting with camera sensor box 2
fig. 0, page 7: The tension of the cord (2) can be adjusted by shifting of the
brass eye (1).
5

Using the product

Closing the blind (fig. a, page 7)
➤ Pull the blind with both hands up to the desired position.
The two cords in the guide rails keep the blind in the desired position.
Opening the blind
➤ Guide the blind back into its holder slowly using both hands.
6

Cleaning and maintenance

A
NOTICE! Damage hazard
Do not use sharp or hard objects or cleaning agents for cleaning as these
may damage the product.
➤ Occasionally clean the product with a damp cloth.
➤ To prevent material fatigue, do not keep the blind closed for an extended period
of time.
10
FP300
EN