reer IP BabyCam Move Gebrauchsanleitung Seite 29

Problem
Unclear or frozen
picture
Constant temperature
alarm
Camera cannot be
controlled in full
screen mode
Possible cause
• To many devices
are using the
same router as the
camera
• Your internet band-
width is too low to
view the HD image
• Camera and router
are too far apart
• Current measured
value in app is too
close to maximum
and minimum tem-
perature limits
• Camera image is
zoomed in
- 29 -
Action
• Disconnect some of
the other devices
from your router
• Change image qua-
lity (e.g. from 1080p
HD to smooth, SD or
720p)
• Reduce distance
between camera
and router
• Raise or lower
temperature limit in
the app
• Zoom out using two
fingers (pinch-to-
zoom) or with a
double click until full
image is once again
visible
GB