6. Install the flat bar on the bottom chimney first, then on the wall. You can carry
out this step provisionally to mark the drillings of the wall mounting and drill the
relevant holes.
C
HIMNEY
7. Place the top and bottom chimney on the hood and fix the bottom one on it
(look at the drawing connect chimney to hood).
8. Fix the chimney-installation bracket below the ceiling on the wall using the screws
and dowels.
S
CREW CHIMNEY
↔
BRACKET
9. Lay the exhaust hose to the wall outlet. Fix the exhaust hose with the cable tie (1)
on the wall-outlet (s. fig. below).
W
ALL
C
HIMNEY
S
CREW CHIMNEY
↔
BRACKET
39