Adjusting The Feet; Changing The Illumination Lamp - V-ZUG AdorinaDry V200 Installationsanleitung

1 2
3 4
3 Connect one end of the drain hose
supplied with the dryer to the connection
point from where you removed the hose of
the product in previous step.
4
Connect the other end of the drain hose
directly to the wastewater drain or to the
washbasin.
C
NOTE
• Water drain hose should be attached to a height of
maximum 80 cm.
• Make sure that the water drain hose is not stepped
on and it is not folded between the drain and the
machine.
• If there is an accessories pack supplied with your
product, please see the detailed description.

1.4 Adjusting the feet

1.5 Transportation of the dryer
Drain all water that has remained in the dryer.
If direct water drain connection is made, then remove
the hose connections.
Dryer / User Manual
1-2 Pull hose at
the behind of
the dryer by
hand in order
to disconnect
it from where it
is connected.
Do not use
any tools to
remove the
hose.
• Turn the feet to left or
right until the dryer
stands level and
firmly.
A
WARNING!
• We recommend carrying the dryer in upright
position. If it is not possible to carry the machine
in the upright position, we recommend carrying it
by tilting towards the right side when looked from
the front.
1.6 Warnings about sounds
C
NOTE
• Water collected during operation is pumped to
water tank. It is normal to hear pumping noise
during this process.

1.7 Changing the illumination lamp

In case an illumination lamp is used in your laundry
dryer.To change the Bulb/LED used for illumination
of your tumble dryer, call your Authorized Service.
The lamp(s) used in this appliance is not suitable for
household room illumination. The intended purpose of
this lamp is to assist the user to place laundry in the
tumble dryer in a comfortable way. The lamps used
in this appliance have to withstand extreme physical
conditions such as vibrations and temperatures above
50 °C
• It is normal to hear a
metallic noise from
the compressor
sometimes during
operation.
9