Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1 Installation
Before the calling the nearest Authorized Service for
the installation of the dryer, ensure that electrical
installation and water drain is appropriate referring to
the user's manual. If they are not suitable, contact a
qualified electrician and technician to make necessary
arrangements.
C
NOTE
•
Preparation of the dryer's location as well as the
electrical and waste water installations is under
customer's responsibility.
A
WARNING!
•
Prior to installation, visually check if the dryer has
any defects on it. If the drier is damaged, do not
have it installed. Damaged products cause risks
for your safety.
•
Let your dryer wait for 12 hours before starting
to use it.
1.1 Appropriate installation location
Install the dryer on a stable and level surface.
Dryer is heavy. Do not move it by yourself.
•
Operate your dryer in a well ventilated, dust-free
environment.
•
The gap between the dryer and the surface should
not be reduced by the materials such as carpet,
wood and tape.
•
Do not cover the ventilation grills of the dryer.
•
There must not be a lockable, sliding or hinged
door that may block the opening of the loading
door in the place where your dryer is to be
installed.
•
Once the dryer is installed, it should stay at the
same place where its connections have been
made. When installing the dryer, make sure that
its rear wall does not touch anywhere (tap, socket,
etc.).
•
Place the dryer at least 1 cm away from the edges
of other furniture.
•
Your dryer can be operated at temperatures
between +5°C and +35°C. If the operating
conditions fall outside of this range, operation of
the dryer will be adversely affected and it can get
damaged.
•
The rear surface of the tumble dryer shall be
placed against a wall.
8
B
DANGER!
Do not place the dryer on the power cable.
* Ignore following warning if your
product's system does not contain
R290.
DANGER!
•
Dryer contains R290 refrigerant.*
•
R290 is an environment-friendly, but flammable
refrigerant.*
•
Ensure that the air inlet of the dryer is open and it
is well-ventilated.*
•
Keep potential flame sources away from the
dryer.*
1.2 Removing the transportation
safety assembly
A
WARNING!
1.3 Connecting to the drain
You can directly drain accumulated water through the
water drain hose supplied with the product instead of
periodically draining the water collected in the water
tank.
Connecting the water drain hose
•
Remove the
transportation safety
assembly before
using the dryer for
the first time.
•
If the door swing side
of your appliance
can be modified,
see the reversible
door mounting
instructions.
Dryer / User Manual
Werbung
Inhaltsverzeichnis
