Setting Up And Connecting; Unpacking; Starting Up - AEG CTV 4958 Bedienungsanleitung

English
44
Defect

Unpacking

Setting up
Remote control battery
installation / replace
If the machine should become defective at some point:

If the power supply cable for this appliance is damaged, it must be
replaced by the manufacturer or his customer services, in order to
avoid hazards.

Should fluid have seeped into the player or if the player has been
dropped down or damaged in any other way, the player must be
examined by an authorized dealer. Disconnect the player from the
power supply and consult an authorized dealer.

Setting up and connecting

Unpack the appliance and all accessories and check that the contents
are complete.
CAUTION:
Always transport/send the player in its original packaging to prevent
it from being damaged. Keep the packaging for this purpose. Dispose
of unnecessary packaging material in accordance with the regulations
applicable in your country.

NOTE:
Get in touch with your dealer immediately if you notice damage
caused by transport.
1. Place the player on a stable, heat resistant, horizontal and level
surface. Keep a distance of at least 10 cm from walls and objects.
2. Connect the device to a properly installed power socket.

Starting up

WARNING:
Leaking out battery acid can damage your health. Remove the battery
from the battery compartment as soon as it is exhausted or if the
remote control is not going to be used for a longer period of time.
Wipe up leaked out battery acid with a cloth. In case of skin contact
immediately wash the affected area. Seek medical advice if battery
acid has been swallowed.In case of contact with your eyes wash out
the eyes and seek medical advice.
CAUTION:
When disposing of old batteries you should strictly comply with the
legal and environmental regulations applicable in your country. Do not
throw batteries into ire!

NOTE:

The lithium cell may have been secured with a plastic sheet for
transport purposes. This is to prolong the battery life. Remove this
sheet prior to first time use in order to put the remote control into
operation.

The lifetime of the enclosed batteries may be shortened because of
storage.
1. Open the battery compartment on the bottom of the remote control.