Warranty Terms & Conditions - Awenta HRV 100 P Bedienungsanleitung

• During all maintenance works, comply with the safety norms and OHS provisions (PN-IEC 60364-3).
• Before commencing the works on the fan, the fan should be powered o and secured against being
activated again!
• Air ducts of the fan has to be free from foreign objects - danger caused by the thrown away items!
• Do not carry out maintenance, when the fan is working!
• If you can feel or hear excessive vibrations, you should commission authorised electrician to carry out a
technical inspection of the product.
• The periods between the technical inspections depend on the level of soil of the rotor and lter, however the
technical inspections should not be carried out less frequently than every 6 months!
• Check the rotor for cracks.
• The manufacturer shall not bear any responsibility for the damages resulting from an inadequate
repair.
• In the device, there have been used engines equipped with ball bearings "lubricated for the entire period of
use" the engine does not require lubrication.
Cleaning
In the case of damaging of the insulation, there is a risk of electrocution!
Before you commence the cleaning, disconnect the fan from the mains completely and secure
it against becoming connected again!
• Clean the front panel and the visible parts of the casing with moist cloth.
• Do not use aggressive substances that dissolve lacquer!
• The use of pressure washer or water stream is prohibited!
• While cleaning, you should prevent the water from entering the interior of the electric engine or junction box.
• The cleanliness of the grilles at the inlet/outlet of the fan should be maintained on the ongoing basis.
• In the case of the lter becoming dirty, the fan should be disassembled, removed and then the lter should
be washed with running water.
• Dry the lter before putting it inside again.
WARRANTY TERMS & CONDITIONS
1. The warranty period for the proper operation of the device is 2 years, from the date of sale.
2. The warranty rights and obligations will be void and null without demonstrating a proof of purchase
(a receipt or an invoice).
3. The warranty covers all defects and damage attributable to the manufacturer.
4. Have your product delivered for warranty servicing to the manufacturer or the original seller.
5. The manufacturer undertakes to repair the product or replace it with a new counterpart within 14 days from
ling your warranty complaint.
6. The warranty does not cover any of the following: damage to the product attributable to improper or
unquali ed installation, operation against the intended use, improper transport, storage and/or
maintenance, any faults attributable to unauthorized repairs, or any accidental damage.
7. The warranty does not cover the installation or the maintenance of the product.
8. For all matters not provided for by this Warranty Certi cate, the Polish Civil Code (Articles 577- 582) shall
apply.
Do not dispose of waste electrical equipment with household waste.
The crossed-out wheelie bin symbol on this product means that it is waste of electrical and
electronic equipment (WEEE) at the end of its operating life and shall not be disposed with
household waste. The crossed-out wheelie bin symbol speci es that the product is subject to
obligatory waste segregation schedules for proper disposal. The product is made from
recyclable materials and components. The product user is required to return the product
which has become WEEE to a WEEE collection unit.
EN
11