Kongskilde KDC 4000 PLUS Betriebsanleitung Seite 6

This transfer is located on the fork bracket:.
Do not attempt to move the cleaner by dragging it
across a floor, there is risk of bending the cleaner's
legs. Instead, lift the cleaner in the four lifting points or
with a forklift under the cleaner.
NB - Provide adequate clearance when transporting the
cleaner.
The cleaner can be moved by lifting it in the 4 lifting
points located at the top of the corners, or by forklift
under the longitudinal bars.
Rails for lifting the cleaner by forklift - are shown with
this symbol.
6
Lifting points
Never lift the cleaner with a forklift under the beams of
the lifting arrangement - is shown by this symbol.
When placing the KDC8000 on e.g. a platform where
the cleaner rests on the wheels and feet of the lifting
arrangement, the cleaner must not be placed in a lower
inclination than the horizontal, as there is otherwise
sunstantial risk of deforming the lifting arrangement!
When the cleaner is installed in the final set up,
the transport brackets can be removed.
The cleaner without transport brackets.