Niceboy PILOT XR Bedienungsanleitung Seite 26

10. Signalling LED - a lit red LED means that the camera is
switched on. A blue flashing LED indicates that the camera
is recording a video.
11. Quick Photo Function Sensor - the sensor responds to a
wave of a hand under the camera and takes a photo while
still recording.
12. Reset - restarts the camera if necessary.
13. On / Off / OK - press and hold to turn the camera on /
off. Press while in the menu to confirm the selected item.
In video mode, this will start / stop the video recording. In
photo mode, press to take a photo.
14. microUSB - for charging connection.
15. Input / Output for service purposes
16. Noise Microphone – for sound recording.
17. MicroSD Slot – for memory card.
CAMERA MENU LANGUAGE SETTING
Connect the camera to a power source. After turning the
camera on, go to the camera settings: Press the Menu button
(8) twice and then use the Menu button (9) to scroll to „Langu-
age" option and confirm with the OK button (13). Here you can
select your preferred menu language.
SETTINGS IN VIDEO MODE
Resolution: setting the resolution of the recorded video (4K
video is always recorded with the H.265 codec).
Video Loop: sets cyclic (loop) recording, ie. the time periods
during which videos will be recorded. When the memory card
is full, the oldest recordings will be erased (except for locked
videos taken during emergency recording).
WDR: turns on / off the wide dynamic range function (suitable
for scenery with high contrast or for night recording).
G-Sensor: G-Sensor intensity setting. the G-Sensor detects vib-
rations and automatically starts emergency recording function
for the recorded video (prevents the video from being erased).
26