Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Adjusting the metal bracelet
If you have chosen a metal bracelet, you can easily adjust
it to the size of your wrist. You can make this adjustment
yourself by removing or adding individual bracelet links.
Taking the bracelet apart and
removing individual links
the securing pin (1) at the desired point of separation and,
at the same time, displace the pivot pin laterally by ap-
proximately 3 millimetres (2) with the second special tool.
Remove the bracelet from the case
as described and open the clasp by
pressing the button on the side. Lay
the bracelet with its top surface on a
firm base. Using the special tools
provided, you can now push down
Now pull the protruding pivot pin from
the bracelet (3). The metal bracelet
is now separated, and you can adjust
the length of the bracelet by removing
or adding individual links.
Werbung
