Calibration Of The Ph Measurement; Setting The Ph Setpoint; Manual Injection; Activation/Deactivation Of Ph Regulation - ULS PAPI004215-INTER5 Gebrauchsanweisung

2.7.4. Calibration of the pH measurement

Menu

2.7.5. Setting the pH setpoint

Menu

2.7.6. Manual injection

Menu
Priming of the peristaltic
pump and filling of semi-
rigid pipes
pH corrector injection
Means
correct operation of the
peristaltic pump

2.7.7. Activation/deactivation of pH regulation

Menu
Possible settings
From 6.5 to 7.5, in increments of 0.1
Possible settings
From 6.8 to 7.6, in increments of 0.1
Functions
of checking the
Possible settings
ON (to activate)
OFF (to disable)
Setting
Possible settings
by default
From 30 s to 10
min,
in 30 s
increments
Default setting
Current measurement
Default setting
7.2
Instructions
To start injecting:
Confirm
setting. (The peristaltic
pump is running, and the
timer countdown
displayed in real time.)
1 min
To pause,
and to restart injection:
Press OK.
To stop injection:
Press .
Default setting
ON
the selected
is
10