Default Display; Keypad - ULS PAPI004215-INTER5 Gebrauchsanweisung

2.3.2. Default display

Possible
settings
menu
In-line
Dashboard

2.4. Keypad

COMMAND KEY
(depending on
the model)
MENU
None.
BOOST
T°C
None.
SALT
pH
Select a value or data item.
OK
Overview
pH measurement
corrector injection is in progress.
pH measurement
only displayed when automatic pH
corrector injection is in progress.
Switch on the electronics unit.
A few minutes after switching on, pH regulation starts automatically, provided that it is
not disabled, and certain alarms have not been activated.
Switch off the electronics unit (press and hold).
Condition:
- No alarm triggered.
- No alert triggered.
- No navigation in the menus in progress.
- No pH corrector injection in progress.
When switching it off, the screen and the green LED turn off, and the red LED comes on.
Access the menus.
Water temperature display for a few seconds
.
Cancel a command.
Back to the previous (sub)menu.
Acknowledge an alarm or alert (press or press and hold, depending on the alarm or alert).
Command confirmation.
Enter a (sub-)menu.
Acknowledge an alarm or alert (press or press and hold, depending on the alarm or alert).
Meaning
Measures the water temperature
FUNCTION
(press and hold).
menu (press and hold).
automatic pH
-line
5