Velleman VTSUSB Benutzerhandbuch Seite 4

away from the body, clothes, or other flammable
material. Do not aim the hot air gun at the eyes.
Use gloves and/or heat-resistant tools to pick up
the PCB assembly to prevent burns. Always return
the irons and gun to their stands between uses;
always let the device cool down after use and
before storage.
Place the device on a level, stable, and fire
resistant working surface.
WARNING! - This tool must be placed on its stand
when not in use; do not leave the tool unattended
when switched on.
Do not inhale solder fumes. The vapours that are
released during soldering are harmful. Therefore,
you shall only use the soldering station in well-
ventilated areas or under an exhaust hood (solder
fume extractor). Dispose of fume filters and solder
residue in accordance with local regulations.
Use the soldering iron on a heatproof
•
workbench.
Place the soldering iron in its holder after use.
•
Let a hot soldering iron cool down naturally and
•
do not immerse in water.
3. General Guidelines
Refer to the Velleman
•
Protect this device from shocks and abuse. Avoid brute force when operating the device.
•
Keep this device away from rain, moisture, splashing and dripping liquids.
•
Familiarise yourself with the functions of the device before actually using it.
•
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.
•
Only use the device for its intended purpose. Using the device in an unauthorised way will void the
warranty.
•
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
•
Nor Velleman nor its dealers can be held responsible for any damage (extraordinary, incidental or
V. 03 – 03/02/2021
® Service and Quality Warranty on the last pages of this manual.
VTSUSB
4 ©Velleman nv