Herunterladen Diese Seite drucken

Werbung

VTSUSB1
USER MANUAL
1.
Introduction
To all residents of the European Union
Important environmental information about this
product
This symbol on the device or the package indicates that
disposal of the device after its lifecycle could
harm the environment. Do not dispose of
the unit (or batteries) as unsorted municipal
waste; it should be taken to a specialized
company for recycling. This device should
be returned to your distributor or to a local
recycling
service.
Respect
environmental rules. If in doubt, contact your local
waste disposal authorities.
Thank you for choosing Velleman! Please read the
manual thoroughly before bringing this device into
service. If the device was damaged in transit, do not
install or use it and contact your dealer.
2.
Safety Instructions
● Read and understand this manual and all safety signs
before
using
this
appliance.
● Class
● Indoor use only. ● Do not use near inflammable
products or in explosive atmospheres. Be careful when
using the appliance in places where there are combustible
materials. Do not use in presence of an explosive
atmosphere. Heat may be conducted to combustible
materials which are out of sight. Only use in properly
ventilated rooms. ● A fire may result if the appliance is
not used with care. Do not touch the shafts and tips as
this can cause serious burns. Keep the tips away from the
body, clothes, or other flammable material. Do not aim at
the eyes. Use gloves and/or heat-resistant tools to pick
up the PCB assembly to prevent burns. Always return the
irons and gun to their stands between uses. Place on its
stand after use and allow to cool before storage. Place
the device on a level, stable, and fire-resistant working
surface. ● Do not inhale solder fumes. The vapours that
are released during soldering are harmful. Therefore, you
shall only use the soldering station in well-ventilated
areas or under an exhaust hood (solder fume extractor).
Dispose of fume filters and solder residue in accordance
with local regulations. ● WARNING - This tool must be
placed on its stand when not in use. Do not leave the tool
unattended when switched on. Use the soldering iron on
a heatproof workbench. Let a hot soldering iron cool
down naturally and do not immerse in water. ● Always
keep tips coated with tin to ensure a long service life.
● This device can be used by children aged from 8 years
and above, and persons with reduced physical, sensory
or
mental
capabilities
or
lack
of
experience
knowledge if they have been given supervision or
instruction concerning the use of the device in a safe way
and understand the hazards involved. Children shall not
play with the device. Cleaning and user maintenance
shall not be made by children without supervision.
● There are no user-serviceable parts inside the device.
V. 01 – 31/01/2019
Refer to an authorized dealer for service and/or spare
parts. ● Do not immerge the device in any liquid. Keep
the main unit away from high heat and fire.
3.
General Guidelines
● Refer to the Velleman
www.velleman.eu. ● Protect this device from shocks and
abuse. Avoid brute force when operating the device.
● Familiarise yourself with the functions of the device
before actually using it. ● All modifications of the device
are forbidden for safety reasons. Damage caused by user
modifications to the device is not covered by the
warranty. ● Only use the device for its intended purpose.
Using the device in an unauthorised way will void the
warranty. ● Damage caused by disregard of certain
guidelines in this manual is not covered by the warranty
and the dealer will not accept responsibility for any
ensuing defects or problems. ● Keep this manual for
future reference.
4.
Overview
1. soldering button
3. charging LED
5.
Operation
Battery and Charging
Warning: Do not puncture batteries or throw them in fire
as they may explode. Do not attempt to recharge non-
rechargeable batteries (alkaline). Dispose of batteries in
accordance with local regulations. Keep batteries away
from children.
● Prior to first use, insert the rechargeable battery into
the soldering iron. Open the soldering iron by turning the
back part to the left. Insert the battery in the shaft, the
negative pole on the bottom. Close the soldering iron and
proceed to a complete charge. ● Connect the stand to a
USB port using the included USB cable. To do this, insert
the small plug into the stand and the larger plug into a
powered USB port. ● Place the soldering iron in the
stand. The charging LED will light red while charging. The
soldering iron is ready for use as soon as the charging
LED turns green.
General Operation
● Take the soldering iron out of its stand. ● Hold the
soldering button pressed. You can solder as soon as the
soldering LED lights. ● When finished soldering, release
the soldering button and place the soldering iron in its
stand. ● Disconnect the stand from the power supply and
let the soldering iron cool after use.
Tips on How to Solder
● File off any dirt, rust or paint on the part you wish to
solder. ● Heat the part with the soldering iron. ● Apply
rosin-based solder to the part and melt it with the
soldering iron. When using non-rosin-based solder, be
sure to apply a soldering paste to the part before
applying the solder. ● Wait for the solder to cool and
harden before moving the soldered part.
6.
Maintenance
● Occasionally wipe with a damp cloth to keep it looking
new. Do not use harsh chemicals, cleaning solvents or
strong detergents. ● Store the appliance, its accessories
the
local
and this user manual in the original packaging. Always
store in a cool and dry place.
7.
Specifications
input .......................................................... 5 V, USB
power ............................................................... 8 W
max. heating temperature ......................... 380-420 °C
heating time ................................................ < 15 sec
cooling time ................................................. < 30 sec
III
appliance.
battery .......................... 18650 Li-ion 3.6 V, 2200 mAh
Use this device with original accessories only.
Velleman nv cannot be held responsible in the
event
of
damage
(incorrect) use of this device. For more info
concerning this product and the latest version of
this
manual,
www.velleman.eu. The information in this manual
is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman
nv. All worldwide rights reserved. No part of this
manual
may
reduced to any electronic medium or otherwise without
the prior written consent of the copyright holder.
1.
Inleiding
Aan alle ingezetenen van de Europese Unie
Belangrijke
product
Dit symbool op het toestel of de verpakking geeft aan
and
dat, als het na zijn levenscyclus wordt
weggeworpen,
toebrengen aan het milieu. Gooi dit toestel
(en
gewone huishoudelijke afval; het moet bij
een gespecialiseerd bedrijf terechtkomen
voor recyclage. U moet dit toestel naar uw
VTSUSB1
®
Service and Quality Warranty on
2. soldering LED
or
injury
resulting
from
please
visit
our
website
be
copied,
reproduced, translated
or
Handleiding
milieu-informatie
betreffende
dit
dit
toestel
schade
kan
eventuele
batterijen)
niet
bij
het
1
verdeler of naar een lokaal recyclagepunt brengen.
Respecteer de plaatselijke milieuwetgeving. Hebt u
vragen, contacteer dan de plaatselijke autoriteiten
betreffende de verwijdering.
Dank u voor uw aankoop! Lees deze handleiding grondig
door voor u het toestel in gebruik neemt. Werd het
toestel beschadigd tijdens het transport, installeer het
dan niet en raadpleeg uw dealer.
2.
Veiligheidsvoorschriften
● Lees
en
begrijp
deze
handleiding
veiligheidsinstructies
vóór
ingebruikname.
klasse III. ● Gebruik het toestel enkel binnenshuis. ● Niet
gebruiken in de buurt van brandbare producten of
explosieve gassen. Wees voorzichtig wanneer het toestel
wordt
gebruikt
in
de
nabijheid
van
materialen. Gebruik het toestel niet in een omgeving
waar explosiegevaar bestaat. Warmte kan door geleiding
verspreid worden naar ontvlambare materialen die niet
zichtbaar zijn. Gebruik enkel in een goed geventileerde
ruimte. ● Er kan brand ontstaan indien het toestel niet
met zorg wordt behandeld. Raak de schacht en de
soldeerstiften nooit aan, dit kan ernstige brandwonden
veroorzaken. Houd de stift en warme lucht uit de buurt
van het lichaam, kleding of ander brandbaar materiaal.
Richt het toestel niet op de ogen. Draag handschoenen
en/of
gebruik
hittebestendig
gereedschap,
brandwonden te voorkomen. Plaats na gebruik de
soldeerbout altijd terug in de houder. Plaats in de houder
na gebruik en laat afkoelen alvorens op te bergen. Plaats
het toestel op een vlak, stabiel en hittebestendig
oppervlak. ● Adem de vrijgekomen dampen nooit in. De
gassen die tijdens het solderen ontstaan, zijn schadelijk.
Soldeer daarom enkel in goed geventileerde ruimtes of
onder een
geschikte afzuiging. Gooi
soldeerresidu
weg
volgens
de
milieuwetgeving. ● WAARSCHUWING - Plaats het toestel
op de houder wanneer u deze niet gebruikt. Laat het
toestel niet onbeheerd achter wanneer het ingeschakeld
is.
Gebruik
de
soldeerbout
op
een
oppervlak. Laat de soldeerbout op natuurlijke wijze
afkoelen en dompel de soldeerbout nooit onder in water.
● Vertin de soldeerpunten voor een langere levensduur.
● Dit toestel is geschikt voor gebruik door kinderen vanaf
8 jaar,
door
personen
met
fysieke,
verstandelijke beperkingen, of door personen met gebrek
aan ervaring en kennis, op voorwaarde dat dit onder
toezicht gebeurt van een persoon die verantwoordelijk is
voor hun veiligheid of hun aanwijzingen heeft gegeven,
hoe zij het toestel moeten gebruiken en zich bewust zijn
van de risico's die het gebruik van het toestel met zich
meebrengt. Kinderen mogen niet met het toestel spelen.
De reiniging en het onderhoud van het toestel mogen niet
worden uitgevoerd door kinderen, tenzij ze onder toezicht
staan. ● Er zijn geen onderdelen in het toestel die door
de gebruiker gerepareerd kunnen worden. Contacteer uw
verdeler voor eventuele reserveonderdelen. ● Dompel het
toestel nooit onder in een vloeistof. Stel het toestel niet
bloot aan extreme temperaturen of vuur.
3.
Algemene richtlijnen
Raadpleeg de Velleman
®
service- en kwaliteitsgarantie op
www.velleman.eu. ● Bescherm tegen schokken. Vermijd
brute kracht tijdens de bediening van het toestel. ● Leer
eerst de functies van het toestel kennen voor u het gaat
gebruiken.
● Om
veiligheidsredenen
mag
wijzigingen aanbrengen. Schade door wijzigingen die de
gebruiker heeft aangebracht aan het toestel valt niet
onder de garantie. ● Gebruik het toestel enkel waarvoor
het gemaakt is. De garantie vervalt automatisch bij
ongeoorloofd gebruik. ● De garantie geldt niet voor
schade door het negeren van bepaalde richtlijnen in deze
handleiding en uw dealer zal de verantwoordelijkheid
afwijzen voor defecten of problemen die hier rechtstreeks
verband mee houden. ● Bewaar deze handleiding voor
verdere raadpleging.
4.
Omschrijving
1. soldeerknop
2. soldeerled
3. laadled
5.
Gebruik
Batterij en opladen
Waarschuwing: U mag batterijen nooit doorboren of in
het
vuur
gooien
(explosiegevaar).
Herlaad
alkalinebatterijen.
Gooi
batterijen
weg
plaatselijke milieuwetgeving. Houd batterijen buiten het
bereik van kinderen.
● Plaats de oplaadbare batterij in de soldeerbout voor het
eerste gebruik. Open de soldeerbout door de onderkant
naar links te draaien. Plaats de batterij in de schacht met
de negatieve pool naar beneden gericht. Sluit de
soldeerbout om de batterij volledig op te laden. ● Sluit de
houder aan op een USB-poort met de meegeleverde USB-
kabel. Sluit het kleine uiteinde van de USB-kabel aan op
de houder en het andere uiteinde op een USB-poort.
● Plaats de soldeerbout in de houder. De laadled licht
rood op tijdens het opladen. De soldeerbout is klaar voor
gebruik zodra de laadled groen oplicht.
Algemeen
● Neem de soldeerbout uit de houder. ● Houd de
soldeerknop
ingedrukt.
U
kunt
solderen
soldeerled oplicht. ● Laat na het solderen de soldeerknop
los en plaats de soldeerbout in de houder. ● Trek de
stekker uit het stopcontact en laat de soldeerbout
afkoelen na gebruik.
Hoe te solderen
● Verwijder alle vuiligheid, roest en verf op het te
solderen onderdeel. ● Verhit de te solderen onderdeel
©Velleman nv
en
de
● Toestel
ontvlambare
om
rookfilters
en
plaatselijke
hittebestendig
zintuiglijke
of
u
geen
geen
volgens
de
zodra
de

Werbung

loading

Inhaltszusammenfassung für Velleman VTSUSB1

  • Seite 1 PCB assembly to prevent burns. Always return the ● Plaats de oplaadbare batterij in de soldeerbout voor het The copyright to this manual is owned by Velleman irons and gun to their stands between uses. Place on its eerste gebruik.
  • Seite 2 ● AVERTISSEMENT - Placer l'appareil dans son support fuego (peligro de explosión). Nunca recargue pilas no Velleman SA est l’ayant droit des droits d’auteur de lorsqu'il n'est pas utilisé. Ne jamais laisser l'appareil sans recargables (alcalinas). Respete las leyes locales en ce mode d'emploi.
  • Seite 3 Akku © DERECHOS DE AUTOR widoczne. Używać jedynie w odpowiednio wentylowanych Warnung: Durchbohren Sie nie die Batterien und werfen Velleman NV dispone de los derechos de autor para pomieszczeniach. ● Stosowanie urządzenia Sie diese nicht ins Feuer (Explosionsgefahr). Laden Sie este manual del usuario.
  • Seite 4 Podczas ładowania dioda LED ładowania świeci się na colocada no seu suporte quando não está a ser usada. czerwono. Lutownica jest gotowa do użycia, gdy dioda A Velleman NV detém os direitos de autor deste não deixe a ferramenta ligada e sem alguém a...