Island-Mounted Cooker Hood - Miele DSM 400 Funktionsbeschreibung/Montageanweisung

Island-mounted cooker hood

^ Disconnect the cooker hood from the
mains supply by
- switching it off at the wall socket
and removing the plug; or
- withdrawing the fuse from the fused
spur connection unit; or
- withdrawing the mains fuse; or
removing the screw-out fuse (in
countries where this is applicable).
Ensure current is not supplied to the
appliance while maintenance or
repair work is being carried out.
^ Pull the cover plate downwards.
^ Connect all external components to
the control module (see "Electrical
connection" and "Wiring diagram").
The covers over the supply terminals
can be removed using a screwdriver.
^ Push the control module into the
aperture and secure it using the
screws supplied.
^ Connect the control module cable to
the right hand socket in the cooker
hood.
^ Arrange the cable and then re-fit the
cover plate.
^ The reconnect the cooker hood to the
mains electricity supply.
Installation
15