Setting The Memory Programmes - Panasonic NE-C1475 Bedienungsanleitung

Please ensure that the SD Memory Card is inserted in the Oven.
Your oven has 99 blank memory programmes for your own heating requirement.
All 99 Memory Programmes can be set manually using the Programme Pad on the control panel. However,
these programmes can be stored onto the SD Memory Card using your personal computer (see "Storing
Programme Data on SD Memory Card").
Any programme information stored directly onto the SD Memory Card will override any manual programmes
previously set.
ACTION
1 Open Door.
2 Press PROG Pad.
Keep door open.
3 Press
Programme Number.
4 Select Power.
5 Select Time.
6 Press PROG Pad.
Programme Lock
•
It is NOT possible to enter a programme when Programme Lock is set.
(See page 27.)
Multi-Stage (Sequential Cooking)
•
It is possible to programme into the memory a 2 or 3 stage programme using MICROWAVE,
CONVECTION, GRILL, FAN GRILL, GRILL CONVECTION or COMBINATION.
Changing a Memory Programme
•
To change a programme simply follow steps 1-6 on previous page entering your new programme.

Setting the Memory Programmes

INFORMATION
The oven lamp will come on.
Keep pad pressed for 2 seconds until "P" is
displayed.
eg. To set Programme 03: SIMMER 20 mins.
Press NUMBER Pads 0 and 3.
If programme has been previously set, this will
appear in the display.
If the programme memory is empty then the
programme number will appear in the display.
eg. Press MICROWAVE Pad 4 times.
eg. Press NUMBER Pads 2, 0, 0, and 0.
After 3 seconds display returns to "0".
- 25 -
DISPLAY