Jinbei MSN 400 Pro Anleitung Seite 21

Delay
Multi
Setting the group
Press the Menu key twice to set the group, the group icon blinks . Turn
the control knob to set the group, press the control knob to confirm,
the GR group symbol stops flashing.
GR: A/B/C/D/E/F/G/H/I/J/L/O/P/Q/S/U
Channel setting CH: 00~31
Press the Menu key three times to switch to the channel and turn the
control knob to set the channel. Press the setting knob to confirm, the
CH channel symbol stops flashing.
Setting the modelling light
Press the modelling light key briefly to set the modelling light to
"Off / Proportional / 100% / Individual" . In individual mode, press the
modelling light key until the symbol flashes, turn the modelling knob
to adjust the brightness of the modelling light and press the model-
ling knob to confirm.
Overview
- Hz
21
-