EasyCap
• Press the Menu key once briefly to switch to the "FN1" mask setting
interface .
• Press and hold the control knob to switch on the EasyCap function,
turn the control knob and set the total number of flash light groups
in mask mode, and press the control knob briefly to set the number
of flashes.
For example, "6 - 2" means that there are 6 groups of flash positi-
ons in the mask mode, and the current flash will flash at the second
shutter release .
Delay
Briefly press the menu key twice to switch to "FN2", turn the setting
knob and set the delay flash time, briefly press the setting knob and
switch the time unit .
Flash delay setting: 0 . 0 0 ~ 30 seconds .
Power value display
decimal
Setting the power indicator
Press the Menu key three times to switch to "FN3", turn the setting
knob and set "on / off" and press the test flash key to exit.
"On" – fractional number display / "Off" – decimal display
Operation
Power value display
fraction
23