Jinbei MSN 400 Pro Anleitung Seite 25

1
Calculation formula of the multi-flash mode:
Flash times / flash frequency = shutter speed
High speed sync mode / HSS
• Briefly press the flash mode button twice briefly to Switch on HSS
mode .
• Support of camera shutter speed up to 1 / 8000s
• In HSS mode the flash output adjustment is ~ 9.0 (1 / 1).
• Press the flash mode button three times to switch off the HSS
mode .
• The HSS symbol disappears and the flash goes into normal mode.
• In normal flash mode, the colour temperature is 5500K ± 100K.
• Colour temperature range of two consecutive flashes with the
same output power: ± < 30K .
Photocell (infrared sensor): Press the Menu button approximately
for 2 seconds to switch the infrared function on and off .
Signal tone: Press the signal tone key for about 2 seconds to
switch the signal tone on/off .
Operation
2
Flash times (Number of exposures
1
for one image)
Flash frequency per second
2
25