Zeegma Zonder Robo Vision Bedienungsanleitung Seite 12

EN
How to use water tank (see fig. 11):
1.
Open the tank and pour water into the water inlet hole.
2.
Close the water tank and fix the mop on the dedicated external surface.
3.
Fix the water tank and install in the cleaner.
4.
Press the start/pause key to make the cleaner start wet-cleaning.
How to adjust water consumption for wet cleaning, depending on surface:
Press the suction power adjustment key on the remote control or in the application and cho-
ose 1 of 3 suction powers. Every press changes the water consumption to low/medium/high.
How to clean and empty the water tank and mop (see fig. 12):
1.
Remove the water tank.
2.
Pour water out of the tank.
3.
Remove the mop.
4.
Clean the water tank.
5.
Clean and dry the mop.
6.
Dry the water tank.
5. How to clean the dustbin (see fig. 13):
1.
Press the dustbin open key to remove the bin.
2.
Remove the bin and open the side cover for emptying the dustbin.
3.
Empty the dustbin, dispose of rubbish into a rubbish bin.
4.
Open the cover and remove HEPA filter and preliminary filter.
5.
It is not advisable to wash HEPA filter under running water, gently remove dust.
6.
Wash the preliminary filter under running water.
7.
Next you can clean the interior with a wet cloth.
8.
Do not wash the entire dustbin under running water.
9.
Dry the bin and filter before another use. Do not expose filters to direct sunlight.
10.
Wash the preliminary filter every 15-30 days, the life of HEPA filter is about 3 months.
11.
Make sure the filters are dry before you reinstall them.
12.
Close the dustbin emptying cover and install the bin in the cleaner.
6. How to clean side brushes and central brush (see fig. 14):
1.
To remove the central brush, remove the cover and brush.
2.
Use the cleaning brush to remove remains on the brush.
3.
Detach side brushes and wipe with a dry cloth.