An antenna pipe clamp (Part No. 540 100), for example, can be used to connect the antenna standpipe
to the equipotential bonding system (functional equipotential bonding system).
®
HVI
power Conductor integrated in the supporting tube / pipe clamp installed on a mobile
phone antenna
protective angle acc. to IEC 62305 Part 3,
Table 2
e.g. stainless steel air-termination tip
(Ø 10 mm, L = 1000 mm),
Part No. 101 001
e.g. antenna
GRP / StSt supporting tube,
e.g. Part No. 105 320,
supporting tube
Note:
Observe antenna earthing
as per DIN VDE 0855!
connection with the equipotential
bonding system of the building
Figure 7 Isolated air-termination system with a
tenna – Pipe clamp
L = 3500 mm
α α
s
e.g. stainless steel pipe clamp,
Part No. 105 360
clamping range supporting tube Ø = 50 to 300 mm
earth-termination system
HVI
power Conductor
®
HVI
power Conductor
®
earth connection element
installed on a mobile phone an-
21