Hvi ® Power Conductors Integrated In The Supporting Tube - DEHN + SÖHNE HVI power Montageanleitung

4.5 HVI power Conductors integrated in the supporting tube
®
The supporting tubes in which the HVI
bonding element in the form of a spring element.
The head of the supporting tube is mechanically sealed and thus water-proof.
For static reasons, spanning cables over several supporting tubes to split the current is not possible
in every situation! Please contact us for more detailed information.
Different types of supporting tubes for integrating HVI
and page 14):
Table 7 Types of supporting tubes
14
power Conductors are integrated house an equipotential
®
Part No. Consisting of:
105 320
Supporting tube
105 392 Supporting tube with
side outlet
Air-termination tip (Ø
10 mm)
Supporting tube with
side outlet
105 321 Supporting tube
105 393 Supporting tube with
side outlet
Air-termination tip
Ø 22/16/10 mm
105 322 Supporting tube
105 394 Supporting tube with
side outlet
Air-termination tip
Ø 10 mm
105 323 Supporting tube
105 395
Supporting tube with
side outlet
Air-termination tip
Ø 22/16/10 mm
power Conductors are available (see Table 7
®
Component To t a l
length length
3.5 m 4.5 m
1.0 m
3.5 m 6.0 m
2.5 m
5.0 m 6.0 m
1.0 m
5.0 m 7.5 m
2.5 m
Minimum length
of the HVI power
®
Conductors
6 m + x m
6 m + x m
6 m + x m
(recommended mi-
nimum length: 8 m)
6 m + x m
(recommended mi-
nimum length: 8 m)