DEHN + SÖHNE HVI power Montageanleitung Seite 51

As-delivered condition
air-termination rod
ø = 22/16/10 mm
air-termination tip
ø 10 mm
locking screws
tightening torque of 15 Nm
-air-termination tip 2x M8x16 mm
-air-termination rod 2x M8x10 mm
locking screw
head piece
(hexagon screw M8x25 mm,
tightening torque of 15 Nm)
GRP / StSt supporting tube
HVI
(as-delivered condition)
Figure 5 Installation of the head piece in the supporting tube
power Conductor
®
Assembled
condition
head of the supporting tube
Correct assembly
water-proof
locking screw
head piece, hexagon screw M8 x 25 mm,
tightening torque of 15 Nm
Incorrect assembly
approx.
13 mm
approx.
7 mm
approx.
0 mm
19