Major Function - LENSHOOKE X1 PRO Benutzerhandbuch

V. Major Function
LensHooke X1 PRO Semen Quality Analyzer
®
Turn on / off
1
Turning on the analyzer:
Push the power button down for 2 seconds to turn on the analyzer (as Image 1).
When the touch screen lights up (as Image 2), the analyzer is ready to operate.
2
Turning off the analyzer:
Hold down power button for 10 seconds to directly turn off the analyzer, or you can also push the
power button for 2 seconds until the touch screen shows "Power Off" and select the icon to turn it
off.
Insert / Remove the Test Cassette
1
Insert the Test Cassette:
Insert the test cassette into the slot and
push it to the end.
Charging the battery
1
When the battery power is low, the "Low Battery" message will show on the screen (Image 3). Use
the power adaptor to charge the battery immediately. The "plug" symbol will appear on the touch
screen (as the of Image 4) during charging. If the "plug" symbol fails to show on the screen,
check to make sure the adaptor is properly connected to the analyzer and socket.
Image 1
2019/11/01 21:42
Image 2
2
Remove the Test Cassette:
After the test, take the test cassette out of the
slot.
5