LENSHOOKE X1 PRO Benutzerhandbuch Seite 22

(3) The default setting is "Automatic". When you choose this icon, the device use dynamic IP address,
which is assigned when the network is connected and changes over time.
2019/11/01 21:42
(4) If you want to change to the static IP address, please select "Manual" and then select "IP address",
"Subnet Mask", "Gateway" and fill in the information respectively.
2019/11/01 21:42
NOTE
If you don't enter the completed information for IP address, Subnet Mask, and Gateway, the config-
ure IP status will stay in "Automatic".
4
Access Password
(1) Select "Settings" and then select the "Access Password" icon.
2019/11/01 21:42
2019/11/01 21:42
2019/11/01 21:42
18