System Update - LENSHOOKE X1 PRO Benutzerhandbuch

3

System Update

(1) Prepare the a USB Drive with system update software. (Capacity : 1GB or more)
(Please contact with your local distributor for the system update software).
(2) Select "Utilities" and then select the "System Update" icon.
2019/11/01 21:42
(3) Please connect the device with the power adaptor, and plug the USB Drive with the update file
into the analyzer. Select the ''Update'' icon to update the system.
2019/11/01 21:42
(4) Select the ''Restart'' icon to restart the analyzer and complete the system update. The system
will configure updates automatically, and restart the analyzer when the system update is
completed.
2019/11/01 21:42
(Rev. X1.XXXX)
NOTE
Please back up all records before system update.
DO NOT turn off or unplug the device during the update process. Make sure to plug in the power
adaptor and insert the USB Drive with system update file when updating the system.
Rev. X1.XXXX
Rev. X1.XXXX
13
2019/11/01 21:42
2019/11/01 21:42
Rev. X1.XXXX
(Rev. X1.XXXX)