USB to RJ45 Gigabit Ethernet Adaptor
1
Analyzer : Connect to the LAN (Local Area Network)
(1)
Please use USB to RJ45 Gigabit Ethernet Adaptor to connent the analyzer to the LAN (Local Area
network) with a cable.
2
Other Device: Access the Analyzer
(1)
Please open a browser from your computer/laptop/ipad, and then input the IP Address of the
device. (You can check this information from the analyzer by selecting the LAN Password.)
2019/11/01 21:42
(2)
Please Login by input the LAN Password. (You can check this information from the analyzer by
selecting the LAN Password.)
(3) You can preview PDF or MP4 files.
(4) You can download PDF, MP4, and CSV files.
If there are too many people accessing into the same analyzer at the same time, it might affect the
performance of the analyzer.
Please use one of the following browers to access the login page.
- Firefox (Ver: 62 or more), Chrome (Ver: 69 or more), Microsoft Edge for Window 10, and Safari...etc.
(Please refer to www.LensHooke.com for more details.)
Only support iPad, PC or laptop.
It is suggested to keep the power plugged in while connected to the LAN.
24