Quality Control - LENSHOOKE X1 PRO Benutzerhandbuch

NOTE
ONLY the icon that turn blue can be selected.
You can also connect the analyzer to the LAN to print out the result. (Please refer to page 24 to
connect the analyzer to the LAN.)
If a " " symbol appears next to the concentration result, it means that the sample has aggrega-
tion of spermatozoa, sperm crystals, or bubbles that may impact the result. We will suggest you to
note the result or redo the test or seek professional assistance.
If a " " symbol appears next to the motility result, it means that the device detects the sperms
move by push rather than swim that may impact the result. We will suggest you to note the result
or redo the test or seek professional assistance.
The analyzer will not calculate the pinhead, since it is not considered a sperm by the clinic as it has
no chromatin.
If you want to use our analyzer to exam for the vasectomy patient, please use the manual exam
method to double confirm.
If you didn't apply the sample to the pH drip area, the result of pH value will show < 6.0. Therefore,
please check the pH drip area of the test cassette, if the result shows < 6.0.
Utilities
1

Quality Control

(1) Select "Utilities" and then select the "Quality Control" icon.
2019/11/01 21:42
(2) Please input the LOT number on the label of the LensHooke
LensHooke X QC Reticle (For Semen) or LensHooke
®
the LOT number and then select "
yyyy/mm/dd hr:mi
2019/11/01 21:42 2019/11/01 21:42
Conexão de Rede
19062825081
1 1 2 2
ABC ABC DEF DEF GHI GHI
6 6 7 7
PQR PQR STU STU VWX VWX
3 3 4 4 5 5
JKL JKL MNO MNO
8 8 9 9 0 0
YZ YZ #+= #+=
®
X QC Video (For Semen). Please confirm
®
" to go to the next step.
9
2019/11/01 21:42
X QC Beads (For Semen) or