JVC kd-dv5101 Bedienungsanleitung Seite 40

Indications
PTY-STBY
PTY standby
TA VOL
Traffic announcement
volume
P-SEARCH
Programme search
LEVEL
Audio level meter
DIMMER
Dimmer
TEL
Telephone muting
SCROLL*
2
Scroll
TAG DISP
Tag display
AMP GAIN
Amplifier gain control
* Depends on the amplifier gain control.
1
* 2 Some characters or symbols will not be shown (and will be blanked) on the display
(Ex. "ABCå!d#" ]"ABCA D ").
40
Selectable settings, [reference page]
Activates PTY Standby Reception with one of the 29 PTY codes, [17].
OFF [Initial] and 29 PTY codes [15]
[Initial: VOL 20]; VOL 00 — VOL 30 or 50*
ON : Using the AF data, the receiver tunes in to another
frequency broadcasting the same programme as the
original preset RDS station is if the preset station signals
are not sufficient.
OFF : [Initial]; Cancels.
ON : [Initial]; Activates the audio level indicator.
OFF : Cancels; sound mode indicator is shown, [36].
AUTO : [Initial]; Dims the display when you turn on the
headlights.
ON : Activates dimmer.
OFF : Cancels.
MUTING 1/MUTING 2: Select either one which mutes the sounds
while using the cellular phone.
OFF : [Initial]; Cancels.
ONCE : [Initial]; Scrolls the disc information once.
AUTO : Repeats scrolling (5-second intervals in between).
OFF : Cancels.
• Even if "SCROLL" is set to "OFF," you can scroll the display by
pressing D DISP for more than one second.
TAG ON : [Initial]; Shows the ID3 tag while playing MP3/WMA
tracks, [34].
TAG OFF : Cancels.
You can change the maximum volume level of this receiver.
LOW PWR : VOL 00 – VOL 30 (Select this if the maximum power
of the speaker is less than 50 W to prevent them from
damaging the speaker.)
HIGH PWR : [Initial]; VOL 00 – VOL 50
1 , [16]