Aux; Audio Settings - Kenwood KDC-461U Bedienungsanleitung

AUX

Preparation:
Select [ON] for [BUILT-IN AUX]. ( 4)
Start listening
1
Connect a portable audio player
(commercially available).
Auxiliary input jack
3.5 mm stereo mini plug with "L"
shaped connector (commercially
available)
2 Press B SRC to select AUX.
3
Turn on the portable audio player and
start playback.
Set the AUX name
While listening to a portable audio player
connected to the unit...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [SYSTEM],
then press the knob.
3
Turn the volume knob to select [AUX NAME
SET], then press the knob.
4 Turn the volume knob to make a selection,
then press the knob.
AUX (default)/ DVD/ PORTABLE/ GAME/ VIDEO/ TV
5
Press and hold to exit.
8

AUDIO SETTINGS

While listening to any source...
1 Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [AUDIO CONTROL], then press the knob.
3
Turn the volume knob to make a selection (see the following table), then press the knob.
Repeat step
4
Press and hold
To return to the previous setting item or hierarchy, press
SUB-W LEVEL –15 to +15 (0)
BASS LEVEL –8 to +8 (+6)
MID LEVEL –8 to +8 (+5)
Portable audio
player
TRE LEVEL –8 to +8 (0)
EQ PRO
BASS ADJUST BASS CTR FRQ
BASS LEVEL
BASS Q FACTOR
BASS EXTEND
MID ADJUST MID CTR FRQ
MID LEVEL
MID Q FACTOR
TRE ADJUST TRE CTR FRQ
TRE LEVEL
PRESET EQ DRIVE EQ/ TOP40/ POWERFUL/ ROCK/ POPS/ EASY/ JAZZ/ NATURAL/ USER: Selects a preset equalizer
suitable to the music genre. (Select [USER] to use the customized bass, middle, and treble settings.)
[DRIVE EQ] is a preset equalizer that reduces noise from the road.
BASS BOOST
LEVEL1
LOUDNESS LEVEL1/ LEVEL2: Selects your preferred low and high frequencies boost to produce a well-balanced sound at
a low volume level. ; OFF: Cancels.
3 until the desired item is selected or activated.
to exit.
Adjusts the subwoofer output level.
Adjusts the level to memorize for each source. (Before making an adjustment, select the
source you want to adjust.)
60/ 80/ 100/ 200HZ: Selects the center frequency.
–8 to +8 (+6): Adjusts the level.
1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.
ON: Turns on the extended bass. ; OFF: Cancels.
0.5/ 1.0/ 1.5/ 2.5KHZ: Selects the center frequency.
–8 to +8 (+5): Adjusts the level.
0.75/ 1.00/ 1.25: Adjusts the quality factor.
10.0/ 12.5/ 15.0/ 17.5KHZ: Selects the center frequency.
–8 to +8 (0): Adjusts the level.
/ /
LEVEL2 LEVEL3: Selects your preferred bass boost level. ; OFF: Cancels.
.
Default: XX