Ventilation Requirements; Operation; Control Panel - Electrolux IK285SA Benutzerinformation

3.3 Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your
domestic power supply.
• The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the
E.E.C. Directives.

3.4 Ventilation requirements

The airflow behind the appliance must be
sufficient.

4. OPERATION

4.1 Control Panel

Display
1
Temperature warmer button
2
Temperature colder button
3
OK
4
It is possible to change predefined sound
of buttons by pressing together Mode
1
6 5 4 3
Mode
5
ON/OFF
6
and temperature colder button for a few
seconds. Change is reversible.
min.
5 cm
200 cm 2
CAUTION!
Refer to the assembly
instructions for the
installation.
2
ENGLISH 7
min.
200 cm 2