LENCO CS-351 Benutzerhandbuch Seite 13

OPERATION OPERATION
OPERATION OPERATION
EONTA: EONTA:
EONTA: DX/LO (DISTANCE/LOCAL): EONTA:
The purpose of this key is to reduce
unwanted EON TA switching, which
EON TA information was received from
current station and the radio switched to
that EON linked
information could not be received
because the EON linked station is
located too far from that area. So the
radio is switched back to current station
again. In above operation, a customer
listens to a wrong program or mute
sound for a while.
EON TA LOCAL mode
When the filed strength level of EON
linked is less than threshold level, the
radio does not switch that station, and a
customer can hardly listen to any
disturbances.
When EON TA LOCAL mode is selected,
"EON TA LO" on numeric display is
indicated for a few seconds.
EON TA DISTANCE mode
EON TA switch is tried to implemented
by the information of current station.
When EON TA DISTANCE mode is
selected, "EON TA DX" on numeric
display is indicated for a few seconds
TA-VOLUME:
TA-VOLUME: Volume 30 (the default TA TA-VOLUME: TA-VOLUME:
volume value is 30, you can adjust it
from 0 to 100).
REG REG REG (REGION): : : : OFF/ON REG
REGION ON mode: AF switching or PI
SEEK is implemented to the station
which have all PI codes are the same as
current station.
REGION OFF mode: The regional code
in the format of PI code is ignored when
AF switching
implemented.
- - - - Listening Listening Listening Listening to to to to Traffic Traffic Traffic Announcement Traffic
TA
TA TA button (22) is operated as follows: TA
When pressed and held for several
station, but
or PI SEEK
Announcement Announcement Announcement
seconds, it is engaging whether TA
mode on or off.
When TA TA TA TA mode, is on and a traffic
announcement is transmitted:
When the unit was in CD (MP3) mode
no
or AUX IN mode or IPOD mode, it will
switch temporarily to radio mode.
Temporary switch over to an EON linked
station when EON detects a traffic
announcement on that other program.
If the volume level was under the
threshold point it will be raised to the
threshold point. But the user changed
the volume level, which was more than
the threshold point (min. TA
level), it will be set to the last level.
TA TA
When TA TA mode is on, TA
segment is turned on.
When a TP station is received, TP of
individual segment is turned on.
TA TA TA TA interruption function
The current traffic announcement is
cancelled by pressing this key.
TA TA
But the TA TA mode will not be off.
The RDS data used are the PI, PS, AF,
TP, TA, EON and PTY data.
PI: Program Identification code
Code for identifying programs
PS: Program Service Name
Broadcast
expressed
characters
AF: Alternative Frequencies
Frequency
stations
program
TP: Traffic Program Identification
is
Identification
information-broadcasting station
TA: Traffic Announcement Identification
Identification data showing traffic
information is being transmitted or
not
12
TA volume TA TA
TA TA
TA of individual
station name
in alphanumerically
list of broadcasting
transmitting the
data for
TA
TA TA
data
same
traffic