Miele PG 8055 Installationsplan Seite 13

Water connection
(without steam
condenser)
Water connection
(with steam con-
denser)
Environmental re-
quirements
Connecting an ex-
ternal dispensing
system
Liquid agents: pos-
ition of external
containers
The dishwasher can be plumbed in to the cold water, hot water and
drainage points without a backflow protection device. The stopcock
to the water supply must be easily accessible.
The water supply to the dishwasher can be connected to either cold
water or hot water.
The machine can be plumbed in to the cold water, hot water, demin-
eralised water and drainage points without a backflow protection
device. Use the enclosed Y-piece to establish the water intake for
the dishwasher (cold water) and the steam condenser. Alternatively,
you can install an additional cold water line to connect the steam
condenser.
If hot water is not available, both intake hoses (cold and hot water)
must be connected to the cold water supply via a Y-piece.
The stopcock to the water supply must be easily accessible.
Condensate can build up in the area surrounding the dishwasher.
Any furniture and fittings in the room must therefore be suitable for
purpose. If the machine is fitted under a suitable worktop, the panel
supplied must be fitted above the door aperture to protect the work-
top from moisture damage.
Up to two dispensing systems for liquid cleaning agents and rinsing
agents can be connected to the back of the dishwasher. Machines
with integrated dispensing systems have an external connection for
rinsing agents.
The liquid agent container for external dispensing must be positioned
either next to or underneath the machine only. The container may be
placed on the floor or in an adjacent cabinet. Do not place the con-
tainer on top of or above the machine. Make sure that the dispensing
hose does not get kinked or trapped.
en - Installation notes
13