Wiseup DVR-0015C Benutzerhandbuch Seite 2

II. What's in the Box
-1× Hat Camera
-1× Data/Charging USB Cable
-1× Remote Controller
-1× USB Charger Adapter
III. Get the Camera Ready
3.1 Connect this camera to a computer with the USB cable to format the memory card which is
built-in the camera.
3.2 Recharge this camera battery with the USB charger adapter for at least 1 hour (see charpter IX).
Note: if for any reasons this camera battery cannot be recharged, please check if the wire
connection is tight and firm, or you can try it with another USB cable. If still no success, please send
an email to sales@wiseupshop.com for help.
IV. Record Video
4.1 Slide the power switch to position "ON", hold down the button A for 3 seconds to turn on the
camera. The camera will vibrate once, both blue and yellow indicators will light up, then the blue
indicator light will go off and the yellow indicator light will be solid on, indicating that this camera
has entered into standby mode.