Installation, Operation - flamco Easycontact V5.0 Montage- Und Bedienungsanleitung

RS485
F - S
1 ~
Easy
SDS
RS485
F - S
1 ~
SCU
Easy
SPC
SDS
RS485
F - S
1 ~
SCU
Easy
1 ~
SPC
SDS
RS485
F - S
1 ~
SCU
Easy
2.3.1 Pictogram description 1 ~
SPC
SDS
RS485
F - S
RS485
F - S
SCU 1 ~
Easy
1 ~
Easy
1 ~
Allocation of control units (transmitters).
SPC
SDS
RS485
F - S
SPC X
SDS
1 ~
SCU
Easy Field 1
SCU 1.2.4...
1 ~
SPC
Pictograms assigned to control units for
SDS
RS485
F - S
RS485
F - S
SPC
X
SPC
malfunction messages (F-S: Flexcon automatic
1 ~
SCU
1 ~
Easy
Easy
1.2.4...
1 ~
control;
SPC
SDS
SDS 1 ~
X
SPC
Easy: Easycontrol).
SCU
SCU
1.2.4...
Not specified:
1 ~
SPC
SPC
Control version Flamcomat/Table.
SPC X
1.2.4...
1 ~
Field 2
1 ~
SPC X
Pictograms assigned to control units software
X
SPC
1.2.4... version higher than 1.2.3 for error messages
1.2.4...
SPC menu: Service [11]
X
SPC
» Version information [11-3] » [11-3-1]
1.2.4...
SPC X
SPC X
1.2.4...
1.2.4...
Pictograms for error messages, field 1 and 2.
M
Minimum filling level.
(No pressure increase)
M
Maximum filling level.
M
(No pressure reduction)
M
Minimum operating pressure. Parameter min.
pressure, control settings under hysteresis
M
-0.3 bar.
M
Maximum operating pressure. Parameter max.
M
M
pressure, control settings upper hysteresis
+0.3 bar.
M
M
M
Motor protection ON.
(M1; M2, if present and configured)
M
Diaphragm rupture
M
(only if installed and configured)
M
M
General (mapped or not mapped by
pictograms)
M
M
M
Operation indicator, coded. Input stand-by.
RS485
F - S
1 ~
Easy LED blue, permanent "ON":
Receiving data (RS485).
SDS
RS485
F - S
Mains voltage (~1) is present.
1 ~
SCU
Easy
SPC LED blue, flashing "ON":
SDS
Mains voltage (~1) is present,
SCU
1 ~ Not receiving data (RS485).
SPC
Inputs A; B swapped or not present.
LED blue, "OFF":
1 ~
Not receiving data (RS485).
Inputs A; B swapped or not present.
Mains voltage (~1) is not present.
X
SPC
1.2.4...
SPC X
1.2.4...
Pictograms for error messages, field 1 and 2.
Error message or group of messages that
lead(s) to switching off filling or discharge.
(only if installed and configured)
Error message or group of messages that
leads to switching off pressure reduction.
M
M
M
M
7