Product Description And Specifications; Product Features; Technical Data; Noise/Vibration Information - Bosch GEX 40-150 Professional Originalbetriebsanleitung

12 | English
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for dry sanding of wood, plastic,
metal, filler and varnished surfaces.
Power tools with electronic control are also suitable for pol-
ishing.
This power tool is not suitable for bench-mounted use.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Auxiliary handle (insulated gripping surface)
(2) Screw for auxiliary handle
(3) Orbital stroke rate preselection thumbwheel
(4) On/off switch
(5) Lock-on button for on/off switch
(6) Filter element (Microfilter system)
(7) Complete dust box (Microfilter system)
(8) Sanding pad
(9) Handle (insulated gripping surface)
a)
(10) Sanding sheet
(11) Screw for sanding pad
(12) Extraction outlet
a)
(13) Dust extraction hose
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical Data

Random orbit sander
Article number
Sanding pad included with
product
Orbital stroke rate preselec-
tion
Rated power input
No-load speed n
0
No-load orbital stroke rate
Orbit diameter
Weight according to
EPTA-Procedure 01:2014
1 609 92A 6HP | (01.04.2021)
Random orbit sander
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.

Noise/Vibration Information

Noise emission values determined according
to EN 62841-2-4.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 81 dB(A); sound power
level 92 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 62841-2-4:
a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
a)
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
a)
working period.
a)
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u
GEX 40-150
Changing the Sanding Sheet
3 601 C7B 2..
To remove the sanding sheet (10), lift it from the side and
●
pull it from the sanding pad (8).
Remove dirt and dust from the sanding pad (8), e.g. with a
●
paintbrush, before attaching a new sanding sheet.
The surface of the sanding pad (8) is fitted with a hook-and-
W 400
loop fastening, allowing sanding sheets with a hook-and-loop
-1
min 5500–12000
backing to be secured quickly and easily.
-1
min 11000–24000 Press the sanding sheet (10) firmly onto the underside of
the sanding pad (8).
mm 4
To ensure optimum dust extraction, make sure that the
kg 2.4
punched holes in the sanding sheet (10) are aligned with the
drilled holes in the sanding pad (8).
(triax vector sum) and uncertainty K
h
2 2
< 2.5 m/s , K = 1.5 m/s ,
h
Pull the plug out of the socket before carrying out any
work on the power tool.
GEX 40-150
/ II
Bosch Power Tools