Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety regulations for heated pools.
During normal swimming activities, 26÷30 [°C] water temperature is recommended. 38 [°C] water temperature is only considered
safe for adults in good health conditions. The utmost caution is recommended for use by children.
Pool temperature must never exceed 40 [°C].
Do not drink alcoholic beverages before, after and while swimming. Alcohol consumption may cause drowsiness, loss of
consciousness and consequent drowning.
Swimming in pools with temperatures over 38 [° C] is not recommended for pregnant women. Excessively hot water could damage
the foetus, especially during the first trimester, causing deformities or brain damage.
People who suffer from diabetes, heart disease, circulatory or blood pressure problems should consult a physician before entering
heated pools.
Heat pump panel.
Heat pump on/off button.
Operating mode selection button (heating/cooling) or operating parameter programming access.
Up button.
Down button.
Multi-function button.
Timer or temperature control on/off button.
Heat pump operating mode indication: cooling.
Heat pump operating mode indication: heating.
Turning on the heat pump.
Use the protection device and/or contact switch to turn on the heat pump.
Standby.
Water temperature is displayed when the heat pump is turned on. The heat pump is in standby conditions. It does not
heat or cool pool water.
Turning off the heat pump.
Use the protection device and/or contact switch to turn off the heat pump. Make sure the heat pump is in standby before turning it
off.
Starting the heat pump
To start the heat pump, press
or cooling), the last temperature set and the current pool water temperature (heating or cooling) is immediately
displayed.
Operating mode selection.
Start the heat pump, press
Set temperature regulation.
Set temperature can be regulated by pressing
interval 5÷45 [° C].
Automatic start settings.
When the pump is in standby, press
select when the heat pump should automatically start (1÷24 hours).
Automatic start can only be set when the pump is in standby.
Automatic standby settings.
When the pump is running, press
select when the heat pump should automatically return to standby mode (1÷24 hours).
Automatic standby can only be set when the pump is running.
Key lock.
Keys can be locked to prevent accidental regulations.
To lock keys, press and simultaneously hold down keys
Key lock, heating mode.
Service Processing
For technical information, missing parts or in the case of a complaint, please contact our customer service:
Important note: On the pump label of your heat pump is a production number shown,
please provide this number in the case of a complaint.
Nome file: 7500024 - ISTR.UTENTE HEAT PUMP-QUICK INSTRUCTION.doc
Steinbach VertriebsgmbH, Aistingerstrasse 2, 4311 Schwertberg, AUSTRIA
Tel. Austria: (0820) 200 100 111 (0,145€ per minute from all networks)
Tel. Germany: (0180) 5 405 100 111 (0,14€ per minute from landline, mobile radio max. 0,42€ per minute)
e-mail: service@steinbach.at, www.steinbach.at
. The heat pump starts within 3 minutes. The last selected operating mode (heating
to select the operating mode:
, to increase it and
to turn on the automatic start mode. Press
to turn on the automatic standby mode. Press
Heating,
is displayed.
Cooling,
is displayed.
, to decrease it. Set temperature can be selected in the
and
for 5 seconds. Symbol
Key lock, cooling mode.
Pagina 2-di 4
(increase),
(decrease) to
(increase),
(decrease) to
will appear on the display.
Rev. 0 del/of 31/08/2009
Werbung
