Troubleshooting - Braun 5 Serie Bedienungsanleitung

The shaver needs to be cleaned under
running water after each foam or gel
usage!
Cleaning of the Foil & Cutter cassette with
a brush
Switch off the shaver. Remove the Foil &
Cutter cassette and tap it out on a flat surface.
Using the brush, clean the area below the
attachment. Do not clean the cassette with
the brush as this may damage it!
Renewal of Foil & Cutter cassette
Braun recommends changing your shaver's
Foil & Cutter cassette every 18 months to
maintain your shaver's maximum
performance.
Available at your dealer or Braun Service
Centres:
Foil & Cutter cassette: 53B
28
Trouble Shooting
Problem Possible
reason
Shaver
Shaver does 1. The battery is
not start empty.
when push- 2. The shaver
ing the on/ can only be
off button. operated
cordless.
3. Travel lock is
activated.
Charging 1. Sometimes
does not charging
start when starts delayed
connected to (e.g. after long
the power storage).
socket. 2. Ambient tem-
perature is out
of valid range.
3. Power supply
is not plugged
into the shaver
properly.
Shaver does Ambient
not charge temperature is
completely out of valid
and keeps range.
blinking.
Unpleasant Shaver head is
smell from cleaned with
the shaver water.
head.
Remedy
1. Charge the
shaver.
2. Unpulg the
shaver.
3. Push the on/
off button for
5 seconds to
unlock the
shaver.
1. Wait a few
minutes.
Charging will
start
automatically.
2. Recom-
mended
ambient tem-
perature for
charging is
5 °C to 35 °C.
3. Power supply
needs to snap
in.
Recommended
ambient
temperature for
charging is 5 °C
to 35 °C.
When cleaning
the shaver head
with water only
use hot water and
from time to time
some liquid soap
(without abrasive
substances).
Remove Foil /
Cutter cassette
to let it dry.