Modster Vector SR48 Betriebsanleitung Seite 5

User Manual - Betriebsanleitung
Steering Trim
The steering trim dial is used to adjust the steering trim when
the wheel is centered.
Rotating the dial changes the steering trim (the steering at rest
position). Normally, the steering trim is adjusted until the vehicle
tracks straight.
Receiver Connection and Binding
Binding is the process of programming the receiver to recognize
the GUID (Globally Unique Identifier) code of a single specific
transmitter. When a receiver is bound to a transmitter, the receiver
will only respond to that specific transmitter. If you need to rebind
for any reason, please follow these steps:
1. With the transmitter switched OFF.
2. Power on the receiver, then turn on the transmitter within 5
seconds.
3. The receiver LED will flash for 3-8 seconds to bind automatically.
4. After the receiver LED stop flashing, it means the binding is done.
www
5
Steering Trim
Antenna
LED
Light
Brushed Transmitter
www.modster.at