Cognex In-Sight 2000 Serie Bedienungsanleitung Seite 12

Install Software and Documentation
To configure an In-Sight vision sensor, In-Sight Explorer software must be installed
on a networked PC. In-Sight software is available as a free download from the In-
Sight support site: http://www.cognex.com/Support/InSight.
Log On to the Vision Sensor
1. Open the In-Sight Explorer software.
2. From the Get Connected Application Step, select your In-Sight vision
sensor from the Select an In-Sight Sensor or Emulator group box and press
the Connect button.
In-Sight 2000 Vision Sensor Specifications
Specifications
Temperature
Maximum Humidity
Protection
Shock (Shipping and
Storage)
Vibration (Shipping and
Storage)
2000-110
2000-120
Operating: 0°C to 40°C (32°F to 104°F)
Storage: -10°C to 60°C (14°F to 140°F)
< 95%, non-condensing
IP65 when all connectors are attached to cables or shielded by a sealing cap
IEC 60068-2-27: 1000 shocks, semi-sinusoidal, 11g, 10ms
IEC 60068-2-6: vibration test in each of the three main axis for 2 hours @ 10 Gs (10 to
500 Hz at 100m/s2 /15mm)
2000-130
2000-120C
11
2000-130C 2000-23M