Nice MBar Installierungs-Und Gebrauchsanleitungen Und Hinweise Seite 24

Declaration of conformity to be used in case the product is not installed in compliance with the criteria reported in chapter 1.3.1.
and declaration of incorporation for a "quasi-machine"
Declaration in accordance with Directives: 1995/5/EC (R&TTE), 2004/108/EC (EMC);
Note - The content of this declaration corresponds to the declaration made in the official document filed in the offices of Nice S.p.a., and
particularly the latest version thereof available prior to the printing of this manual. The text contained here has been adapted to meet edi-
torial requirements. A copy of the original declaration may be requested from Nice S.p.a. (TV) I.
Declaration number: 402/M-LBAR
Name of manufacturer:
Address:
Person authorized to
provide technical
documentation:
Product type:
Model / Type :
Accessories:
The undersigned Luigi Paro, as Managing Director, hereby declares under his own responsibility that the products identified
above comply with the provisions of the following directives:
• Directive 1999/5/CE OF THE EUROPEAN PARLIAMENT AND COUNCIL dated March 9 1999 regarding radios and com-
munications terminals and reciprocal recognition of their conformity in accordance with the following harmonized stan-
dards:
- Protection of health (art. 3(1)(a)): EN 50371:2002
- Electrical safety (art. 3(1)(a)): EN 60950-1:2006+A11:2009
- Electromagnetic compatibility (art. 3(1)(b)): EN 301 489-1 V1.8.1:2008, EN 301 489-3 V1.4.1:2002
- Radio spectrum (art. 3(2)): )): EN 300 330-2 V1.5.1:2010
In accordance with directive 1999/5/CE (annex V), the product is classified as class 1 and marked:
• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of December 15 2004 concerning align-
ment of Member States' legislation regarding electromagnetic compatibility and abrogating directive 89/336/EEC, accord-
ing to the following harmonized standards: EN 61000-6-2:2005, EN 61000-6-3:2007
The product also complies with the following directive in accordance with the requirements for "quasi-machines":
• Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of May 17 2006 regarding machines and
amending directive 95/16/EC (consolidated text)
- I declare that the pertinent technical documentation has been prepared in accordance with Annex VII B to Directive
2006/42/EC and that the following essential requirements have been met: 1.1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2-
1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11
- The manufacturer agrees to send the national authorities pertinent information on the "quasi-machine" in response to a
motivated request without affecting its intellectual property rights.
- If the "quasi-machine" is operated in a European country with an official language other than the language used in this
declaration, the importer must associate a translation with this declaration.
- The "quasi-machine" must not be operated until the final machine in which it is to be incorporated is declared to conform
to the provisions of Directive 2006/42/EC, if applicable to it.
The product also complies with the following standards:
EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008+A14:2010
The parts of the product which are subject to the following standards comply with them:
EN 13241-1:2003, EN 12445:2002, EN 12453:2002, EN 12978:2003, EN 60335-2-103:2003+A11:2009
Oderzo, June 21 2011
22 – English
APPENDIX II
CE declaration of conformity
2006/42/EC (MD) annex II, part B
Revision: 0
NICE S.p.A.
Via Pezza Alta 13, Rustignè Industrial Zone, 31046 Oderzo (TV) Italy
Mr. Oscar Marchetto
Electromechanical barrier lift
M3BAR, M5BAR, M7BAR, LBAR
XBA14, XBA15, XBA4, XBA6, XBA18, XBA9, XBA7, XBA8
Language: EN
0682
Luigi Paro
(Managing Director)