Seite 1
Installationsanleitung J21021.050-0 Backofen über Backofen 10.10.14 BEAN Gültigkeitsbereich Diese Installationsanleitung gilt für die Modelle: 27A–42A, 44A, 45A, 47A, 48A, 50A, 51A, 53A–58A, 60A–63A 21003–21004, 21015–21030, 23001–23015 Installation Bei Bauform 55-600 & 55-381 müssen die Auflagewinkel K5.0572 nach unten montiert werden! Langlöcher können zur Ausrichtung der Auflagewinkel benutzt werden.
Seite 2
Notice d’installation J21021.050-0 Four sur four 10.10.14 BEAN Domaine de validité Cette notice d’installation est valable pour les modèles: 27A–42A, 44A, 45A, 47A, 48A, 50A, 51A, 53A–58A, 60A–63A 21003–21004, 21015–21030, 23001–23015 Installation Pour le type de construction 55-600 & 55-381, les équerres support K5.0572 doivent être installées vers le bas! Les trous oblongs peuvent être utilisés pour la mise au point des équerres de support.
Seite 3
Istruzioni d’installazione J21021.050-0 Forno sopra forno 10.10.14 BEAN Campo di validità Queste istruzioni d’installazione riguardano i modelli: 27A–42A, 44A, 45A, 47A, 48A, 50A, 51A, 53A–58A, 60A–63A 21003–21004, 21015–21030, 23001–23015 Installazione Per forma costruttiva 55-600 & 55-381, gli angoli d’appoggio K5.0572 devono essere installati verso il basso! I fori oblunghi servono per l'orientamento della staffa d'appoggio.
Seite 4
Installation instructions J21021.050-0 Oven above oven 10.10.14 BEAN Validity These installation instructions apply to the models: 27A–42A, 44A, 45A, 47A, 48A, 50A, 51A, 53A–58A, 60A–63A 21003–21004, 21015–21030, 23001–23015 Installation For type of construction 55-600 & 55-381, the support angles K5.0572 must be installed downwards! Elongated holes can be used to align the mounting angles.