Ec Declaration Of Conformity; Instruction Manual; General Power Tool Safety Warnings - Makita HS6100 Bedienungsanleitung

ENGLISH (Original instructions)
SPECIFICATIONS
Model
Blade diameter
Max. cutting depth
No load speed (min
Overall length
Net weight
Safety class
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014
Intended use
The tool is intended for performing lengthways and
crossways straight cuts and mitre cuts with angles in
wood while in firm contact with the workpiece. With
appropriate saw blades, aluminum can also be sawed.
For public low-voltage distribution systems of
between 220 V and 250 V.
Switching operations of electric apparatus cause voltage
fluctuations. The operation of this device under unfavor-
able mains conditions can have adverse effects to the
operation of other equipment. With a mains impedance
equal or less than 0.32 Ohms it can be presumed that
there will be no negative effects. The mains socket used
for this device must be protected with a fuse or protective
circuit breaker having slow tripping characteristics.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841:
Model HS6100,HS6101
Sound pressure level (L
Sound power level (L
WA
Uncertainty (K) : 3 dB (A)
Model HS7100,HS7101
Sound pressure level (L
Sound power level (L
WA
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841:
Model HS6100,HS6101
Work mode : cutting wood
Vibration emission (a
h,W
Uncertainty (K) : 1.5 m/s
Work mode : cutting metal
Vibration emission (a
h,M
Uncertainty (K) : 1.5 m/s
Model HS7100,HS7101
Work mode : cutting wood
Vibration emission (a
h,W
Uncertainty (K) : 1.5 m/s
All manuals and user guides at all-guides.com
at 0°
at 45°
at 50°
-1
)
) : 98 dB (A)
pA
) : 109 dB (A)
) : 97 dB (A)
pA
) : 108 dB (A)
2
) : 2.5 m/s or less
2
2
) : 2.5 m/s
2
2
) : 2.5 m/s or less
2
HS6100 HS6101
165 mm
54.5 mm
39.5 mm
35.5 mm
297 mm
3.5 kg 3.5 kg
Work mode : cutting metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration emission value may
also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.

General power tool safety warnings

WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
6 ENGLISH
HS7100 HS7101
190 mm
67 mm
48.5 mm
43.5 mm
5,500
310 mm
3.7 kg 3.8 kg
/II
2
) : 2.5 m/s
h,M
2