Before You Start; Select The User - Salter BPA-9301-EU Bedienungsanleitung

5. Repeat steps 2 and 3 to set the [HOUR] and [MINUTE].
6. Repeat steps 2 and 3 to set the [UNIT].
7. After the unit is set,
the LCD will display
"done" first, then display
all the settings you have
done and then turn off.

BEFORE YOU START

Select the User

1. When the monitor is off,
press and hold " " button
to enter user setting mode.
The user ID will blink.
2. Then press " " button again, select the user ID
among user 1, user 2 and guest.
3. When the suitable user
ID blinks, press " " button
to confirm. It will display
User ID+ donE" and then
turn off.
8 I UK