Delete The Records; Data Transmission - Salter BPA-9301-EU Bedienungsanleitung

Delete the records

If you did not get the correct measurement, you can delete
all results for the selected user by following steps. (Take
User 1 for example.)
1. Hold pressing " "
button about 3 seconds
when the monitor is in
the memory mode, the
flash display " dEL ALL"+
User ID will show.
Note: To exit out of delete
mode without deleting any
records, press " " button before pressing " " button
to confirm any delete commands.
2. Press " " button to
confirm deleting and the
monitor will display
"User ID+dEL dOnE"
and then turn off.
3. If there is no record,
when you press " "
button to check the
record, the following
display will show.
Bluetooth Module No.: AW51822
RF Frequency Range: 2402 MHz to 2480 MHz
Output Power Range: ≤4 dBm
Transmitting Distance: 10 meter
LIST OF COMPATIBLE DEVICES:
For iOS devices:
The operating system must be iOS 8 or more, such as iPhone
4S, iPhone 5/5C/5S, iPhone 6/6 Plus and so on.
For Android devices:
The operating system must be 4.3 or more.

Data Transmission

With the advanced Bluetooth 4.0 technology applied,
the mobile or portable equipments, which are equipped
with Bluetooth function in line with BLE Technical
Specifications as well as BLP Protocol established by
global organization Bluetooth SIG, are capable to receive
your personal health data.
1. After each measurement, this device will proceed to
data transmission after measurement. The Bluetooth
symbol blinks on the LCD indicates data is transmitting.
2. With BPA-9301-EU successfully connected with
your mobile device, the measurement data will be
automatically transmitted to your mobile device via
Bluetooth.
(1). The symbol will disappear after successful data
transmission, and you may check your personal health
data stored in your mobile device.
(2). If the data transmission fails, the symbol will remain.
The pending measurement data will be transmitted
to your mobile device when next measurement is
complete.
3. The monitor will shut off after data transmission
process is complete.
CAUTION
Interference may occur in the vicinity of equipment marked with
the following symbol . And BPA-9301-EU may interfering
vicinity electrical equipment.
Sensitive people, including pregnant women pre-eclamptic and
those who implanted medical electronic instruments, should
avoid using the unit whenever possible.
Keep the monitor at least 20 centimeters away from the human
body (especially the head) when the data transmission is
proceeding after measurement.
To enable the data transmission function, this product should be
paired to Bluetooth end at 2.4 GHz.
How to mitigate possible interference?
The range between the device and BT end should be reasonably
close, from 1 meter to 10 meters. Please ensure no obstacles
between the device and BT end so as to obtain quality connection
and to lower the RF output range.
To avoid interference, other electronic devices (particularly those
with wireless transmission / Transmitter) should be kept at least
1 meter away from the monitor.
11 I UK