Operation; Qa Display; Qae Display - Honeywell QA-Serie Betriebsanleitung

4. Operation

4.1 QA display

The operating volume consumed is indicated,
totalized in m³, on the mechanical index.

4.2 QAe display

In default condition, the display on the
electronic index
quantity consumed in m³.
Press the push-button to recall the modes
stated below.
High resolution display mode
-2- is displayed.
High resolution of the total consumption
[m³]. Three places after the decimal point are
displayed. Due to a lack of space the first
figures of the whole numbers for the volume
are removed to accommodate the three
decimal places.
Current flow rate mode
-3- is displayed.
Current flow rate [m³/h]. In the case of reverse
flow, the direction indicator on the display
changes from + to –.
73025026a © Elster GmbH | All rights reserved. Subject to modification
shows the cumulative
Fig. 11 | Mechanical display
Fig. 12 | Default status of QAe
display
Fig. 13 | High resolution display
Fig. 14 | Current flow rate
Honeywell
23