Product Liability And Guarantee; Personnel; Intended Use And Field Of Application - Honeywell QA-Serie Betriebsanleitung

Honeywell
does not allow such restrictions on implied warranties for defects, or the
exclusion or limitation of certain payments for damages, and should such
law apply to you, the above-mentioned exemption from liability, exclusions
or limitations may not apply to you in part or in whole.
For every product purchased, the warranty is valid in accordance with the
corresponding product documentation as well as the conditions of sale and
delivery of the manufacturer.
The manufacturer reserves the right to amend without prior notice the
contents of the documents, including this exemption from liability, in any
form and at any point in time, and for any reason, and shall in no way be liable
for any possible consequences of such amendments.

1.5 Product liability and guarantee

The responsibility as to whether the measuring instrument is suitable for the
intended use is that of the operator. The manufacturer cannot accept any
liability for the consequences of misuse by the operator. Improper
installation or operation of the measuring instruments (systems) will render
the warranty void. Furthermore, the relevant "General Terms and Conditions"
which form the basis of the purchase contract also apply.

1.6 Personnel

This manual is aimed at staff who have adequate specialist and technical
knowledge (in Germany, for instance, in accordance with DVGW Codes of
Practice 492 and 495 or comparable technical regulations) on the basis of
their training and experience in the sector of energy and gas distribution.

1.7 Intended use and field of application

Model series QA is designed for non-calibratable volumetric metering.
All devices are suitable for metering the following media:
 Flammable gases: natural gas/town gas/propane/butane
 Non-flammable gases: air/nitrogen/inert gases
 Other areas of application or media, see Annex C – List of gas types or
on request

NOTE!
 The hydrogen content of gas mixtures must not exceed 10%.
This product is not intended for
 metering aggressive gases, e.g. biogas or sewage gases, oxygen or
acetylene.
12 73025026a © Elster GmbH | All rights reserved. Subject to modification