Appliance Self-Test; Ending The Appliance Self-Test; Customer Service; Repair Order And Advice On Faults - Siemens KS V-Serie Gebrauchsanleitung

Appliance self-test

Your appliance features an automatic
self-test program which shows you
sources of faults which may be repaired
by customer service only.
Starting the appliance self-test
Fig. "
1. Switch off the appliance with the
On/Off button 1 and wait 5 minutes.
2. Switch on the appliance with the
On/Off button 1 and hold down
the temperature setting button 4 for
3–5 seconds within the first
10 seconds until 2 °C is lit on the
temperature display 2.
The self-test programme starts, when
the temperature displays lit up in
succession.
When after a short time the appliance
displays the set temperature prior to the
self-test, everything is ok.
If the super display 3 flashes for
10 seconds, an error has occurred.
Inform customer service.

Ending the appliance self-test

When the programme has ended, the
appliance switches over to normal
operation.

Customer service

Your local customer service can be
found in the telephone directory or in
the customer-service index. Please
provide customer service with the
appliance product number (E-Nr.) and
production number (FD).
These specifications can be found on
the rating plate. Fig. -
To prevent unnecessary call-outs, please
assist customer service by quoting the
product and production numbers. This
will save you additional costs.
Repair order and advice
on faults
Contact information for all countries can
be found on the enclosed customer
service list.
GB 0844 892 8999
IE 01450 2655
US 866 447 4363
en
Calls from a BT
landline will be
charged at up to
3 pence per minute. A
call set-up fee of up to
6 pence may apply.
0.03 € per minute at
peak. Off peak 0.0088
€ per minute.
toll-free
31